Make sure to send us your feedback to review and wall to earn these point to use for next purchase. This feedback will enable us to improve our service to other customer in future. Thank you for purchasing at our store !
KLDSLR Retail Store
We will open every day at 10AM to 7PM daily.
Address : KLDSLR Lot 61-4A, Jalan SS2/75, 47300 Petaling Jaya
Regular checkout will be only process on Monday to Friday. Cut off time at 12PM for same day delivery. Special urgent case can be handle manually if you need. Please call +60374980403 for assistance.
All order that purchase before Cut Off time, will be send same day with Pos laju or Citylink. For KL Area, you may opt for High speed delivery to receive your item the same day evening.
Store Pickup orders placed up to 12PM will be available for same-day pickup after 1PM until store closing time (Only for local Malaysia credit card / bank transfer transaction) . Foreign transaction will need 48 hours for fraud scanning. Store Pickup orders placed less than 1 hour from store closing, or while the store is closed, will be ready for pickup 30 minutes after the store reopens. For item that Pre-Order Status, or out of stock, pick up will be only available after item arrive. Our staff will contact you for the pick up when its ready.
Sevenoak SK-ECH04 is a 2 axis remote controlled Electronic ball head designed for use on Jib Arms, Tripods or sliders. It features adjustable positioning on 2 axis to ensure that the center of gravity of the camera falls correctly within the pan and tilt head to put the minimum load on the DC motors on 2 axis as well as providing the smoothest motion as a result of this design.
The controller comes with SK-ECH04 has a joystick that gives the head precision pan and tilt movement in either direction from a slow crawl up to the required speed. The Joystick will also pan and tilt simultaneously. Further the pan and tilt controller also has variable speed control for both axis to adjust for sensitivity and speed of motion, there are also switches to change the direction of the joystick control and an on/off switch. This device comes with a 12V AC adapter.
The head will pan and tilt through 360 degrees, this enables the camera to point directly upwards or downwards when required. It is driven by two custom-geared motors. The motor drive can be easily disengaged to enable the camera to be balanced correctly on the camera plate. The head's camera plate is adjustable for different sizes of camera and will support up to 10kg.
Joystick Control Box
The Joystick Control gives the head precision pan and tilt movement in either direction from a slow crawl up to the required speed. The Joystick will also pan and tilt simultaneously. On the side of the control box is a variable speed controller, so you can set the maximum speed for better control, there are also switches to change the direction of the joystick control and an on & off switch. On the front of the control box are sockets for the control cables, 12V DC in and two motor sockets. Led lights indicate when the unit is switched on and when the internal battery is on charge. The head is powered by a supplied AC adaptor. On the bottom of the control box is a mounting bracket to attach it to the Jibs and Cranes.
3 sockets: 1 x 12V DC in socket, 2 x motor sockets
Drive: 2 Custom-geared motors
Maximum Camera Weight: 10kg
Pan movement: 360 degree
Tilt movement: 360 degree
Fastest speed: 3.3rpm/min
Slowest speed: 0.5rpm/min
AC adapter input: AC 100-240V
Output: DC 12V-2A
Control cable length: 6 meters